ASTM Blocks

These ASTM Blocks are used to evaluate the sensitivity, surface entry resolution, and horizontal/vertical linearity characteristics of UT equipment. Each Block is Sold Separately.

ASTM E317 Figure 1 & Figure 6

These ASTM Blocks are used to evaluate the sensitivity, surface entry resolution, and horizontal/vertical linearity characteristics of UT equipment. Each Block is Sold Separately.

ASTM E317 block, Figure 1 is used for evaluating horizontal and vertical linearity characteristics of ultrasonic pulse-echo systems. It contains two 3/64″ diameter side-drilled holes.

ASTM E127 & E428 (Set of 8)

Area amplitude determination per ASTM

Set of 8, contains the following hole diameters and metal travel distances:

Flat Bottom Hole Diameters

1/64″ at 3″

2/64″ at 3″

3/64″ at 3″

4/64″ at 3″

5/64″ at 3″

6/64″ at 3″

7/64″ at 3″

8/64″ at 3″

Available materials: Steel 4340, Aluminum 7075, Stainless Steel 304, Titanium 6/4, Inconel 600

ASTM E127& E428 (Set of 10)

Distance and area amplitude per ASTM

Set of 10 containing the following hole diameters and travel distance:

3/64″ – 3.0″ (3-0300), 5/64″ – 0.12″ (5-0012), 5/64″ – 0.25″ (5-0025), 5/64″ – 0.50″ (5-0050), 5/64″ – 0.75″ (5-0075), 5/64″ – 1.5″ (5-0150), 5/64″ – 3.0″ (5-0300), 5/64″ – 6.0″ (5-0600), 8/64″ – 3.0″ (8-0300) and 8/64″ – 6.0″ (8-0600).

ASTM E127 & E428 (Set of 19)

Distance amplitude determination per ASTM

Set of 19 blocks which contain hole diameters of 3/64″, 5/64″ or 8/64″ with metal travel distance of: 0.06″, 0.12″, 0.025″, 0.37″, 0.50″, 0.62″, 0.75″, 0.87″, 1.0″, 1.25″, 1.75″, 2.25″, 2.75″, 3.25″, 3.75″, 4.25″, 4.75″, 5.25″ and 5.75″

At time of order specify either 3/64″, 5/64″, 8/64″ hole sizes for the entire set, one hole size for all 19 bars.