Select Page

Intrinsically Safe FlashLights

3AA HAZ-LO LED Headlamp Intrinsically Safe Flashlights

Intrinsically Safe Flashlights

3AA Haz-lo LED Headlamp Intrinsically Safe Flashlights is a compact, long-running, high-performance headlight to meet the stringent requirements of Division 1 hazardous locations while maintaining exceptional light output and a long run time.

  • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
  • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
  • Three “AA” alkaline batteries (included)
  • Push-button on/off switch easy to use even when wearing heavy gloves
  • One meter impact-resistance tested
  • Package includes both elastic head strap and rubber hard hat strap
  • Intrinsically safe – Class I, Div 1
  • L x W x D: 1.88″ x 2.5″ x 3.08″ (4.76 x 6.35 x 7.82 cm)
  • 7.1 oz (202 g) with batteries and head strap
  • Available in yellow
  • Limited lifetime warranty

Class I, Div. 1, Groups A,B,C,D; Class II, Div. 1, Groups E,F,G; Class III, T4, “Classified”

Class I, Div. 1, Groups A,B,C,D; Class II, Div. 1, Groups E,F,G; Class III, T4, “Exia”

Permissible for use in Gassy Mines, Methane/air only. Appr. No. 20-A070001-0

Meets applicable European Community Directives

3C ProPolymer® HAZ-LO® Intrinsically Safe Flashlights

SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.

  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
  • “Captured locking” set screw will not back out -prevents FOD (Foreign Object Debris)
  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
  • Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw
  • Powered by 3 “C” alkaline batteries (sold separately)
  • C4® LED technology – impervious to shock with a 50,000 hour lifetime – provides 150 lumens; runs 18 hours
  • Sealed switch design protects it from corrosion caused by battery leakage
  • Lightly textured parabolic reflector produces a smooth, uniform beam with optimum peripheral illumination
  • Regulated run time provides consistent performance throughout battery life
  • Larger size makes the 3C ProPolymer HAZ-LO ideally suited for situations where gloves are typically worn
  • O-ring sealed, dust-proof, water-tight enclosure
  • IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray
  • 3 meter impact resistance tested
  • 9.30 in. (23.62 cm); 13.9 oz (394 grams) with batteries (batteries sold separately)
  • Limited lifetime warranty
  • Assembled in the USA

UL Classified Class I, Division 1, Groups A,B,C,D; Class II, Division 1, Groups E,F,G; Class III; Exia; Temperature Code T4

UL Classified Class I, Division 1, Groups A,B,C,D; Class II, Division 1, Groups E,F,G; Class III; Exia; Temperature Code T4

Polystinger® LED HAZ-LO® Intrinsically Safe Flashlights

High Performance Intrinsically Safe Class I, Div. 1 Stinger® Flashlight. Developed for hazardous locations, atmospheres and environments including petro-chem, utility, and other heavy industrial applications.

  • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
  • 3 modes:
    High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
    Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
    Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
  • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres
  • NiCd battery is rechargeable up to 1000 times
  • Multi-function push-button switch tested to 1 million cycles
  • Unbreakable polycarbonate lens with scratch-resistant coating wears through spills and maintains clarity in difficult work environments
  • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination
  • 3 meter impact-resistance tested
  • IPX4 rated for water-resistance
  • Serialized for positive identification
  • 10.2 in. (25.9 cm); 13.5 oz (382 grams) with battery
  • Available in black or yellow
  • Limited lifetime warranty
  • Assembled in USA

USTC Division 1 hazardous location listed: Class I, II, Division 1, Groups C, D, F & G; Class I, Division 2, Groups A, B, C & D; Class III, 138°C (T3C)

Meets applicable European Community Directives