Dakota-UT Flaw Transducers

Ultrasonic Flaw transducer by Dakota Ultrasonics

Single Element Contact Transducers | High Wear

Hi wear contact Ultrasonic Flaw transducer with extended stainless steel ring, used on rough surfaces, castings, billets and extruded parts. Medium Damping, comes with either BNC or Lemo Connectors, specify at time of order.

Ultrasonic Flaw transducer | Advantage NDT Supplies

Element Size	1.0 MHz	2.25 MHz	3.5 MHz	5.0 MHz
.500” DIA.	PSLM501	SLM5025	PSLM5035	SLM5050
.750” DIA.	PSLM751	SLM7525	PSLM7535	SLM7550
1.00” DIA.	PSLM101	SLM1025	PSLM1035	SLM1050

Single Element Contact Transducer | Membrane

Replaceable membrane protected contact transducer, rough surfaces, castings (provides better contact). High Damped, comes with either BNC or LEMO

SLF Ultrasonic Flaw transducer | Advantage NDT Supplies

Element Size	1.0 MHz	2.25 MHz	3.5 MHz	5.0 MHz
.500” DIA.	PSLH501	SLH5025	PSLH5035	SLH5050
.750” DIA.	PSLH751	SLH7525	PSLH7535	SLH7550
1.00” DIA.	PSLH101	SLH1025	PSLH1035	SLH1050

Single Element Contact Transducer | Finger Tip

General contact style Ultrasonic Flaw transducer with stainless steel construction. Good for near surface resolution with a 70% bandwidth, used on common metal & plastics.

Element Size	1.0 MHz	2.25 MHz	3.5 MHz	5.0 MHz	10.0 MHz
.250” DIA.	PFC251	FC2525	PFC2535	FC2550	FC2510
.375” DIA.		FC3725	PFC3735	FC3750	FC3710
.500” DIA.	PFC501	FC5025	PFC5035	FC5050	FC5010
750” DIA.		FC7525	PFC7535	FC7550

Single Element Contact Transducer | Slim line Finger Tip

High frequency general contact transducers with a stainless steel housing, used on common metals & plastics, High Damped.

SL Ultrasonic Flaw transducer | Advantage NDT Supplies

Element Size	5.0 MHz	10.0 MHz	15.0 MHz	20.0 MHz
.125” DIA.	FCSL1250	FCSL1210	FCSL1215	FCSL1220

Standard Shear Wave Transducers

Shear wave transducer designed to use a variety of angle beam wedges for general weld inspection & AWS, and constructed in a low noise plastic or stainless steel housing.

Element Size(Dia.)	A	B	C	D
.500” x .500”	.650”	.750”	1.125”	.810”
500” x 1.00”	.650”	.750”	1.625”	1.312”
.625” x .625”	.650”	.850”	1.350”	1.000”
.750” x .625”	.650”	.850”	1.350”	1.000”
.750” x .750”	.650”	.910”	1.350”	1.000”

Element Size	1.0 MHz	2.25 MHz	5.0 MHz
.500” x .500”	PSS50501	SS50502	SS50505
.500” x 1.00”	PSS50101	SS50102	SS50105
.625” x .625”	PSS62621	SS62622	SS62625
.625” x .750”	PSS62751	SS62752	SS62755
.750” x .750”	PSS75751	SS75752	SS75755

Standard Wedges (SW)

Element Size	45	60	70
.500” x .500”	SW5045	SW5060	SW5070
500” x 1.00”	SW5145	SW5160	SW5170
.625” x .625”	SW6245	SW6260	SW6270

Serrated (AWS Type) Square Wedges (SQW)

Element Size	45	60	70
.625” x .625”	SQW6245	SQW6260	SQW6270
.625” x .750”	SQW6245	SQW6260	SQW6270

SNAIL (AWS Type) Wedge (SNW)

Element Size	45	60	70
Element Size 0.625″ x 0.625″	SNW6245	SNW6260	SNW6270

Quick Change Shear Wave Transducers (QC)

Threaded shear wave Ultrasonic Flaw transducer for quick interchanging between wedges. Ideal for limited access and curved surfaces used for general weld inspection.

Standard

Element Size	1.0 MHz	2.25MHz	3.5MHz	5.0MHz	10MHz
0.250″	—	QC2525	–	QC2550	QC2510
0.375″	–	QC3725	–	QC3750	QC3710
0.500″	–	QC5025	–	QC5050	QC5010

Composite

Element Size	1.0 MHz	2.25MHz	3.5MHz	5.0MHz	10MHz
0.250″	PQC251	PQC2525	–	PQC2550	PQC2510
0.375″	PQC371	PQC3725	–	PQC3750	–
0.500″	PQC501	PQC5025	PQC5035	PQC5050	–

Standard Quick Change Wedges (QW)

Element Size	45 Degree	60 Degree	70 Degree
0.250″	QW2545	QW2560	QW2570
0.375″	QW3745	QW3760	QW3770
0.500″	QW5045	QW5060	QW5070

Quick Change AWS Prove Up Shear Wave Transducer (QCA)

Removable shear wave transducers for quickly interchanging between wedges. Ideal for limited access, curved, and AWS prove up

Element Size	1.0 MHz	2.25MHz	5.0MHz
0.625″ x 0.625″	PQCA62621	QCA62622	QCA62625

Quick Change AWS Prove Up Wedges (QAW)

Element Size	45 Degree	60 Degree	70 Degree
0.625″ x 0.625″	SNW6245	SNW6260	SNW6270

Dual Shear wave Transducers (CDA)

Designed for thin material and weld inspections that require near surface resolution. Will Detect IGSCC (Inter Granular Stress Cracking).

Element Size	1.0 MHz	2.25MHz	5.0MHz
.250” x .250”	PCDA251	CDA2525	CDA2550
.250” x .375”	PCDA25371	CDA253725	CDA253750
.375” x .375”	PCDA371	CDA3725	CDA3750
.500” x .500”	PCDA501	CDA5025	CDA5050

CDA Angle Options-NOT INTERCHANGEABLE

Element Size

45 Degree

60 Degree

70 Degree

Miniature Angle Beam Potted (MAP)

Mini angle beam transducers with a fixed angle, stainless steel housing, all angles are in steel, aluminum angles available.

2.25MHz MAP Transducers

	45 Degree	60 Degree	70 Degree
0.187″	MAP182545	MAP182560	MAP182570
0.250″	MAP252545	MAP252560	MAP252570
0.375″	MAP372545	MAP372560	MAP372570

5.0MHz MAP Transducers

	45 Degree	60 Degree	70 Degree
0.187″	MAP185045	MAP185060	MAP185070
0.250″	MAP255045	MAP255060	MAP255070
0.375″	MAP375045	MAP375060	MAP375070

10MHz MAP Transducers

	45 Degree	60 Degree	70 Degree
0.187″	MAP181045	MAP181060	MAP181070
0.250″	MAP251045	MAP251060	MAP251070
0.375″	MAP371045	MAP371060	MAP371070

Mini Miniature Angle Beam Potted (MMAP)-DIM, 0.375″L x 0.250″W X 0.37″H

Mini miniature angle beam potted transducers with a fixed angle, are designed with stainless steel housing for durability. Standard angles are in steel, all other non standard angles with specified materials can be produced.

5.0MHz MMAP Transducers

	45 Degree	60 Degree	70 Degree
0.187″	MMAP185045	MMAP185060	MMAP185070

10MHz MMAP Transducers

	45 Degree	60 Degree	70 Degree
0.187″	MMAP181045	MMAP181060	MMAP181070

Single Element Delay Line Transducers

Diameter	MHz	Part Number	Connector	Entry
1/4”	15	T-402-5507	Microdot	Side
1/4”	20	T-402-6507	Microdot	Side

Single Element Delay Line Pencil Transducers-Pit Probe

Diameter	MHz	Part Number	Comments	Entry
3/16”	10	T-481-4507	1/16” Tip	Top
3/16”	10	T-681-4507	90° Right Angle	Side
3/16”	15	T-581-5507	1/16” Tip	Side