Select Page

Welding Gauge

Welding Gauge

Welding Gauge such as the Bridgecam Gauge, Digital Weld Gauge, Adjustable Fillet Weld Gauge, 7 piece fillet weld gauge, permit you to accurately check welds of varying sizes quickly and easily. You can measure Weld Throat Thickness, Butt Fillet Type Welds, Weld Length, Misalignments (High-Low), and much more depending upon the Gauge selected.  Weld Measuring Gauges are sturdy, well-made, and come in numerous types to perfectly fit your requirements.  Our Weld Measuring Gauges will surely provide you with many years of service whether in the shop or in the field.

Multi Weld Gauge

The Multi-Weld Gauge provides easy to read measurements of the following welding and fit-up parameters; Internal Hi-Lo, Gap, Filet Height and Leg Length, Weld Height, Undercut Depth, Misalignment, and Angle of Preparation. The Multi-Weld Gauge is equipped with 3 separate scales for all measurements. Metric and Imperial (Thousands of an inch and fractions of an inch). Rules for liner measurements are located on the top and bottom of the Front side of the Scale Plate. The Multi-Weld Gauge is also equipped with 7 unique diameter comparators which are half circles in 1/16″ to 1/2″ in 1/16″ increments (1.6mm to 12.7mm in 1.6mm increments) for convenient diameter estimates (Filet Welds, Welding Rod/Wire, etc.)

Multi Weld Gauge | Adavantage NDT Supplies
Multi Weld Gauge | Adavantage NDT Supplies

Digital Weld Gauge

Digital Welding Gauge | Advantage NDT Supplies
  • X-Large LCD display
  • Reading: Inch, Metric, Inch Fractional
  • 4 Angle display on body: 60°, 70°, 80°, 90°
  • Battery: 3V CR2032 (included)
  • Measuring Range: 0-1.25″ • Accuracy: 0.001″
  • Resolution: 0.0005″, 0.01mm, 128th.

Adjustable Fillet Weld Gauge

Adjustable welding gauge
Unequal Leg Measurement Feature

Measure Fillet Weld & Weld Throat Thickness

Automatic Weld Size Weld Gauge

Automatic Weld Gauge
For Accurate Calibration of Butt Fillet Type Welds

Bridgecam Weld Gauge

Bridge cam weld gauge
The following measurements are possible with the Bridgecam Gauge, in either inches or millimeters: Angle of Preparation, Excess Weld Metal, Depth of Undercut, Depth of Pitting, Weld Throat Size, and more.

Combination 0″ – 10″ Dial/Pit Depth Gauge

Accuracy Meets or Exceeds Federal Specs

Economy Single Purpose Hi/Lo Weld Gauge

Eliminates Rejects – Improves Productivity, Available in Standard or Metric

HI/LO Weld Gauge

Hi/Lo Weld Gauge
Measures Internal Alignment, New Slim Design Is 30% Lighter

“Mini Sub” Socket Weld Gauge

Check Throat Dimensions, Leg Length, All Stainless Steel

Pipe Pit Gauge

Range is 0 to 1/2″ in 1/64″ & .020 Increments, Arm Can be Locked in Place at Any Dimension, All Stainless Steel

Pocket Bridge Cam Weld Gauge

Skew-T Fillet Weld Gauge

Skew T Weld Gauge
w/ Calculator

Check Angle of Vertical Member, Weld Acute Side, Weld Obtuse Side

“V-WAC” Single Weld Gage

V-Wac | Advantage NDT Supplies
Check Undercut, Crown Height, Porosity, Pits, All Stainless Steel